2012年3月1日星期四

Power Supply for BMW OPS Programmer can works on the newest F-series models

Power supply for BMW OPS programmer is especially for BMW OPS programming. It makes battery voltage stable while doing the ECU programming, it usually for professional programming for new BMW and maintaining constant voltage and current during vehicle assembley to programming Charge the battery voltage 12v.

Often times, it takes too long time to do vehicle ECU programming, the battery voltage usually is lower or higher than standard values due to electricity instability which might result sudden disruption during programming and cause damage to Vehicle ECU.

This BMW OPS power supply is especially for BMW OPS Programming. Usually for professional programming for new BMW and maintaining constant voltage and current during vehicle assembly to programming

During programming power levels must be maintained in a narrow range to minimize the chance of damaging controllers. It must be adjusted voltage between 12.8 till 13.5 Volt before connect power cable to car battery. There is a LCD Monitor to show the statistics.
It is no need to run a car to supply for permanent and stable voltage.
It can adjust the AC and DC .It is very strong and stabilization.
It is recommended by almost all manufacturers from BMW and Mercedes Benz to Volvo, Porsche, Volkswagen, Audi, Mann and many others.
Not a Battery Charger.

Not only it can be used for vehicle ECU programming, but also can be used for many other types of UPS (Uninterruptible Power Supply System) equipments. It regulates the output voltage and current with over-charge and over-heat protection and current adjustment.  It can prolong the lifespan of the battery drastically and enables battery charge to the full automatically if it’s used for battery charge.

Features:

1.Regulates output voltage and current.
2.Protects from over-voltage, over-current and over-temperature with voltage and current number reading indicators on the equipment and over-temperature indicator.
3.Enables automatic and safe vehicle ECU programming.
4.Prolongs battery lifespan and Enables battery being charged to the full if it’s used for battery charge.
5.Can be used unattended and fully automatically

Range of application:

1.Cars:regulate battery voltage during programming for BENZ & BMW etc. premium cars
2. Electromotor bike
3. Electrics screen
4. SPC exchange
5. Broadcast transmitter
6. Communication work station
7. UPS
8. Battery and BMW Power supply system

Main parameters:

1. input voltage: AC220V±15%, or AC110V±15%
2. Max. output voltage: 14V
3. Max. output current: 100A

2 条评论:

  1. Hello, I appreciate your awesome blog. BMW OPS is intended for rapid programming of control units.When operated at the SSS, no diagnostic or technical measuring pro-cedures are possible, as no measuring technology is incorporated; in this instance, OPPS / OPS is used predominantly for programming control units (flashing). Communication with the vehicle can be performed both via the MOST and via the OBD interface. The OBD interface is required for the power supply to the OPPS / OPS and has communication properties via which the vehicle can be identified and the data to be programmed can be determined. Thanks
    **********************************
    Ac Dc Adapter for BMW

    回复删除
  2. OPS is designed for rapid programming of control units. When operated at the SSS, no diagnostic or technical measuring pro-cedures are possible, as no measuring technology is incorporated, in this instance, OPPS / OPS is used predominantly for programming/flashing control units. Communication with the vehicle can be performed both via the MOST and the OBD socket. The OBD socket is required for power supply to the OPPS / OPS and has communication properties via which the vehicle can be identified and the data to be programmed can be determined. With CIP version 7.0 or higher, it is possible to clear fault code memories by OPPS / OPS. thanks!
    ----------------
    car adapter-charger

    回复删除