2011年12月11日星期日

How to make car keys with HiTag2 v3.1 programmer?

Gambit&Hitag2 V3.1 2 in 1 Programmer, one programming have two functions. Gambit programmer is intended for RFID(transponders) programming. HiTag2 v3.1 programmer is universal keys programmer, with additional options of keys programming from dump and PIN extraction.

Package including:

1pc x Gambit&Hitag-2 2 in 1 main unit
1pc x USB Cable

Gambit programmer is intended for RFID (transponders) programming. it is mainly produced for programming RFID transponders and generating RFID transponders from the immobilizer dump/eeprom of the car, in order to be able to start the vehicle.
Gambit programmer works with PCF7935, PCF 7936 and T5 transponders which are not precoded and are completely blank.

HiTag2 programmer Features:
1. Latest versions of HiTag2 transponders are fully supported!
2. Widest range of supported cars, using HiTag2 protocol!
3. Deep research work, has allowed us to make device, as much as possible correctly adding keys in the car, without damage to its functionality!
4. Correct BMW keys programming - RADIO REMOTE is working!
5. BMW Explorer keyprog support added!

Key generation from dump is available for the following cars:
1. BMW (CAS1/2/3/3+)
2. AUDI (KESSY)
3. VW (KESSY)
4. PORSCHE (KESSY)
5. BENTLEY (KESSY)
6. CHRYSLER (SKIM)
7. LAND ROVER (EWSх)

Gambit supported transponders:
1. Transponder is OTP (One Time Programable).
2. Password Mode.
3. Transponder can be emulated on PCF7935.
4. Transponder can be read after its configuration (as Temic11-12, Megamos).
5. Transponder can be copied (cloned) into T5 transponder.

HiTag2 v3.1 programmer is universal keys programmer, with additional options of keys programming from dump and PIN extraction. Just insert blank key or appropriate transponder you need to program. Device detects transponder type and will do everything automatically!

没有评论:

发表评论